Measurement Collection Technology
for Today & Tomorrow!
|
|
Measurement Collection Technology |
Accessories
Store
Main Store
Cables Store
USB Store
MicroRidge provides a full range of accessories to support its gage interface and data acquisition solutions. If you need an accessory that is not listed below, please contact us. For additional help on sorting out the "cable maze" visit the Understanding Gage & RS-232 Cables information page.
LC Cable
Connects serial devices to the GageWay3, GageWay5 and Mx8 interfaces.
For additional information refer to the
Connecting RS-232 Devices to Digital Gage Interfaces.
| Photo | Part No. | Description | Price |
){kind=small} |
GW-LC | LC Cable. 24" level converter cable for connecting RS-232 devices to the GageWay3, GageWay5, and Mx8 interfaces. |
ProCable
Converts an RS-232
input to a Mitutoyo compatible output, and can be used by any Mitutoyo
compatible interface. Can be used with the GageWay3, GageWay5, Mx4
and Mx8 interfaces. For additional information refer to the
Connecting RS-232 Devices to Digital Gage
Interfaces and ProCable.
| Photo | Part No. | Description | Price |
){kind=small} |
PROCABLE | 30" ProCable for converting RS-232 data to a Mitutoyo compatible format. This cable can be used with any Mitutoyo compatible interface that supplies 5 volt power on pin 9. MicroRidge supports this cable on the GageWay3, GageWay5, Mx4 and Mx8 interfaces. |
Foot & Hand Switches
Foot and hand switches are available for use with all MicroRidge
interfaces. These are only required if you need to tell the gage interface
to go get a reading from your gage. For example, if you have 4 gages
connected to a GageWay5, you may use a single foot/hand switch to go get a
reading from all of the gages. If you are using a caliper or micrometer,
you typically use the read button on the device to initiate the reading and a
foot/hand switch would not be required. One style of foot/hand switch is used with the GageWay SM. The other style is used with all of the other
MicroRidge gage interfaces.
| Photo | Part No. | Description | Price |
) |
FTSW-MPLG | Foot switch with 6' cable terminated with 2.5 mm subminiature phone plug. | |
) |
FTSW-SM | Foot switch with 6' cable for use with GageWay SM only. | |
) |
HNDSW-MPLG | Handheld remote read switch with 6' cable terminated with 2.5 mm subminiature phone plug. | |
) |
HNDSW-SM | Handheld remote read switch with 6' cable for use with GageWay SM only. |
AC Adapters
The GageWay Series require an external AC adapter to power
the unit. These adapters for the GageWay Series are included as part of the base package and are
available as replacement items. It is extremely rare that these units
fail.
For our International customers that have different voltage, frequency and plug configurations, we offer a universal AC adapter with multiple plug configurations that can be plugged into 110 or 220 volt systems.
| Photo | Part No. | Description | Price |
) |
ADT-9-500P | AC adapter (9 VDC @ 500 ma w/3.5 mm phone plug) for use with the GageWay Series and S/MUX multiplexer. | |
){kind=small} |
ADT-GW-INT | International AC adapter with 4 power plug adapters. Can be used with 100-240 VAC and 47-63 Hz power supply systems. For use with the GageWay Series and S/MUX multiplexer. |
All prices in US dollars and subject to change without notice.
Revised July 13, 2008.
Copyright © 2008 MicroRidge Systems, Inc.
All Rights Reserved.
Revised July 13, 2008