Measurement Collection Technology
for Today & Tomorrow!
|
|
Measurement Collection Technology |
Cables Store
Main Store
Wireless Store
Accessories Store
MicroRidge provides a full range of cables to support its gage interface and data acquisition solutions. If you need a cable that is not listed below, please contact us. For additional help on sorting out the "cable maze" visit the Understanding Gage & RS-232 Cables page.
| Gage & RS-232 Interface Cable Pricing |
RS-232 Connection
Options
Serial devices can be connected to the GageWay3, GageWay5, Mx4 and Mx8 interfaces
with the following devices.
For additional information refer to the
RS-232 Connection Options.
| Photo | Part No. | Description | Price |
){kind=small} |
GW-LC | LC Cable. 24" level converter cable for connecting RS-232 devices to the GageWay3, GageWay5, and Mx8 interfaces. | |
){kind=small} |
PROCABLE | 36" ProCable for converting RS-232 data to a Mitutoyo compatible format. This cable can be used with any Mitutoyo compatible interface that supplies 5 volt power on pin 9. MicroRidge supports this cable on the GageWay3, GageWay5, Mx4 and Mx8 interfaces. | |
|
|
PRO-PKG-36 | ProCable (see description above) and ProAdapter. The ProAdapter allows you to customize the DB9 pinouts. |
Cables for Digital Gages
If the gage is
private labeled, there will be a link in the gage manufacturers column so that
you can view what the gage looks like to assist you in determining the type of
gage you have.
| Gage Mfg. | Photo | Part No. | Description | Price |
| CDI |
|
G-LP-CDI | 6' interface cable for the CDI Logic Plus or Logic Basic gage. The gage output format with this cable is CDI. Only for use with the GageWay 3 and GageWay5 interfaces. | |
| G-LP-MIT | 6' interface cable for the CDI Logic Plus or Logic Basic gage. The gage output format with this cable is Mitutoyo. | |||
| G-LP-MIT-P | 6' interface cable for the CDI Logic Plus gage. Use this cable when you want to power the gage from the interface. The gage output format with this cable is Mitutoyo. | |||
| Mahr Federal |
) |
G-FED-MAX | 6' interface cable for Federal Maxum gage. The number of pins on the gage connector is 6. The gage output format is Federal. Only for use with the GageWay 3 and GageWay5 interfaces. | |
) |
G-FEDMAXE2 | 6' interface cable for Federal Maxum E-2 gage. The number of pins on the gage connector is 10. The gage output format is Federal. Only for use with the GageWay 3 and GageWay5 interfaces. | ||
) |
G-FED-MCRO | 6' interface cable for Federal mMaxum gage. The number of pins on the gage connector is 7. The gage output format is Mitutoyo. | ||
) |
4102411 | 6' interface cable with data send button for Mahr Federal caliper. The gage output format is Mitutoyo. | ||
| Mitutoyo |
) |
905338 | 1m cable commonly used with calipers without absolute encoder, height gages, indicators, depth gages, scale unit and thickness gages. | |
| 905409 | 2m version of 905338 cable. | |||
) |
959149 | 1m cable with data send button commonly used with digimatic calipers with absolute encoder, height gages, depth gages and scale units. | ||
| 959150 | 2m version of 959149 cable. | |||
) |
937387 | 1m cable commonly used with micrometers, indicators, Holtest, micrometer head, borematics, and bench mikes. | ||
| 965013 | 2m version of 937387 cable. | |||
) |
936937 | 1m cable commonly used with indicators, MU-Checkers and gages, displays, linear height, Litematic, Heightmatic, Digi Derm and hardness testers. | ||
| 965014 | 2m version of 936937 cable. | |||
 |
05CZA624 | 1m coolant proof caliper cable. | ||
| -- | Standard Mitutoyo gage cables can be used without modification with all MicroRidge gage interface products. We show the most common cables above. Mitutoyo cables are available from your Mitutoyo dealer or can be purchased from MicroRidge. | |||
| Ono Sokki |
) |
G-ONOSOK-6 | 6' interface cable for Ono Sokki gages. The gage extension (P/N: G-EXT) should not be used with this cable. The gage end of the cable uses a custom connector with a ribbon cable manufactured by Ono Sokki. The gage output format is Ono Sokki. Only for use with the GageWay 3 and GageWay5 interfaces. | |
| Starrett |
) |
G-LP-MIT | 6' interface cable for use with Starrett 2700 series gages. The Starrett 2700 gages are a private labeled version of the CDI Logic Plus gage. The gage output format with this cable is Mitutoyo. | |
| -- |
) |
G-EXT | Gage extension cable (all pins connected). Standard length is 8'. Call for other lengths. | |
| -- |
){kind=small} |
MR-10P-CON | 10-pin connector for user-terminated gage cables. | |
Communications Cables & Cables for RS-232 Gages & Devices that Use
Standard DB9 Extension Cables
Communications cables are serial cables used to connect serial devices to
a GageWay interface or a serial device directly to a PC. Newer devices
typically contain a 9-pin female D-sub connector. This is what is used on
the GageWay SM (RS-232 version) and the GageWay Series. To connect this
type of device to the standard PC serial port, you simply need a straight
through 9-pin serial extension cable. Other gage interfaces on the market use a 25-pin
connector. In order to connect these interfaces, you need a 25 to 9-pin
adapter cable.
We also carry a wide assortment of other DB25 and DB9 to DB25 cables. Please
contact us if you require this type of cable.
| Photo | Part No. | Description | Price |
) |
DB9-EXT6 | 6' 9-pin serial extension cable, DB9F to DB9M. | |
| DB9-EXT10 | 10' 9-pin serial extension cable, DB9F to DB9M. | ||
| DB9-EXT25 | 25' 9-pin serial extension cable, DB9F to DB9M. | ||
) |
PRO-A-DB9 | ProAdapter for customizing DB9 pinouts. | |
) |
DB9-GC-F | DB9 female to female mini gender changer. | |
) |
DB9-GC-M | DB9 male to male mini gender changer. |
USB Cables & Accessories
All MicroRidge products are compatible with USB ports on
PCs. The MobileCollect USB Base and USB version of the GageWay SM interface provides a built-in USB
support. The other MicroRidge products use the serial to USB
cable shown below.
To get a better understanding of USB and what a USB connector looks like to your application program, go to the USB Primer page.
Serial to USB Cable
If you need a physical serial port and your computer does not have any physical serial ports,
you will need to create a serial port with a Serial to USB cable. Most application
software is designed to read data from external devices via a serial port.
This means that whether you plug the serial device into a physical serial port
or into a USB port, it still must look like a serial port to the application
software. The USB option from MicroRidge consists of a USB cable that
will convert any USB port to a serial port.
Allows you to connect the Mobilecollect RS-232 Bases and GageWay Interfaces to a USB port.
Allows you to connect serial devices directly to your PC for troubleshooting.
| Photo | Part No. | Description | Price |
) |
USB-1SP-6 | 6' serial to USB interface cable. |
USB to PS/2 Adapter
This adapter is used to connect the WedgeLink hardware wedges to a
USB port. If you want to use the WedgeLink hardware wedges with a laptop, this may
be the only way you can connect the wedge to the laptop. We also recommend
using this adapter to connect a hardware wedge to a desktop PC.
| Photo | Part No. | Description | Price |
) |
USB-PS2 | USB to PS/2 adapter for keyboard and mouse inputs. Allows hardware wedges to be connected to USB port. |
All prices in US dollars and subject to change without notice.
Revised May 25, 2010.
Copyright © 2010 MicroRidge Systems, Inc.
All Rights Reserved.
Revised July 28, 2010
){kind=small}
)
){kind=small}
)
)
){kind=link}
){kind=link}