GageWay Wireless Setup Program

Measurement Collection Technology
for Today & Tomorrow!

GageWay Wireless System
Setup Program

Setup Program
The GageWay Wireless Setup Program (GW_Wireless_Setup.exe) is used to configure all of the operational modes of the MiniStation and the Mobile Modules. This Setup Program requires Windows 2000 or later and can be installed on as many PC's as required to support your wireless system implementation. Once you have the configuration defined in the Startup Program, download the configuration to the MiniStation and you can save the configuration in a disk file. After the MiniStations are configured, you do not have to have the Setup Program running when collecting wireless information.

As with all of our GageWay interfaces, if a customer is having problems setting up the GageWay Wireless System, they can email us their configuration to review and assist them in achieving their desired results. We have successfully used this approach with our GageWay Series and it has worked very well in supporting our customers.

Base Mode

Main Setup Tab

This tab is used to display general information and the current RF parameter settings for the MiniStation Base.

This screen is also used to set the communications parameters, station ID and unit description.

Base Setup Tab

This tab is used to define how a MiniStation Remote is associated with the available channels.

You can also define output format and custom prefix and suffix strings to be added to the data.

Remote Mode

Main Setup Tab

This tab is used to display general information and the current RF parameter settings for the MiniStation Remote.

This screen is also used to set the communications parameters, station ID and unit description.

Remote Setup Tab

This tab is used to define the target MiniStation Base, the end-of-packet identifier, and the read switch operation.

Parsing Tabs

There are 3 parsing tabs available to allow the user considerable flexibility in selecting what information should be sent to the MiniStation Base and how it should be formatted.

The purpose of the parsing tabs is to allow the user to configure data output so it can be used with virtually any PC application.

Revised January 6, 2008

	Main Setup Tab This tab is used to display general information and the current RF parameter settings for the MiniStation Base. This screen is also used to set the communications parameters, station ID and unit description.
	Base Setup Tab This tab is used to define how a MiniStation Remote is associated with the available channels. You can also define output format and custom prefix and suffix strings to be added to the data.

	Main Setup Tab This tab is used to display general information and the current RF parameter settings for the MiniStation Remote. This screen is also used to set the communications parameters, station ID and unit description.
	Remote Setup Tab This tab is used to define the target MiniStation Base, the end-of-packet identifier, and the read switch operation.
	Parsing Tabs There are 3 parsing tabs available to allow the user considerable flexibility in selecting what information should be sent to the MiniStation Base and how it should be formatted. The purpose of the parsing tabs is to allow the user to configure data output so it can be used with virtually any PC application.