Measurement Collection Technology
for Today & Tomorrow!
|
|
Measurement Collection Technology |
Gage Cables
for Interfaces Store
MicroRidge provides a full range of cables to support its GageWay interfaces. If you need a cable that is not listed in the store below, please contact us. For additional help on sorting out the "cable maze" visit the Understanding Gage & RS-232 Cables page. We typically ship within 24-hours (often the same day), offer free technical support, and a money-back guarantee. Product warranty information can be found on our Product Warranty page.
Listed below are quick links to the categories in this GageWay Interface Store.
Gage Cables for Interfaces Store Categories
Cables for Digital Gages
If the gage is
private labeled, there will be a link in the gage manufacturers column so that
you can view what the gage looks like to assist you in determining the type of
gage you have.
| Gage Mfg. | Photo | Part No. | Description | Price |
| CDI |
|
G-LP-CDI | 6' interface cable for the CDI Logic Plus or Logic Basic gage. The gage output format with this cable is CDI. Only for use with the GageWay 3 and GageWay5 interfaces. | |
| G-LP-MIT | 6' interface cable for the CDI Logic Plus or Logic Basic gage. The gage output format with this cable is Mitutoyo. | |||
| G-LP-MIT-P | 6' interface cable for the CDI Logic Plus gage. Use this cable when you want to power the gage from the interface. The gage output format with this cable is Mitutoyo. | |||
| Mahr Federal |
) |
G-FED-MAX | 6' interface cable for Federal Maxum gage. The number of pins on the gage connector is 6. The gage output format is Federal. Only for use with the GageWay 3 interfaces, GageWay5 interfaces and WedgeLink DG wedges. | |
) |
G-FEDMAXE2 | 6' interface cable for Federal Maxum E-2 gage. The number of pins on the gage connector is 10. The gage output format is Federal. Only for use with the GageWay 3 interfaces, GageWay5 interfaces and WedgeLink DG wedges. | ||
) |
G-FED-MCRO | 6' interface cable for
Federal mMaxum gage. The number of
pins on the gage connector is 7. The gage output format is Mitutoyo. This cable cannot be used with the Federal mMaxum II gage. |
||
) |
4102411 | 6' interface cable with data send button for Mahr Federal caliper. The gage output format is Mitutoyo. | ||
| Mitutoyo |
) |
905338 | 1m cable commonly used with height gages, indicators, depth gages, scale unit and thickness gages. | |
| 905409 | 2m version of 905338 cable. | |||
) |
959149 | 1m cable with data send button commonly used with digimatic calipers with absolute encoder, height gages, depth gages and scale units. | ||
| 959150 | 2m version of 959149 cable. | |||
) |
937387 | 1m cable commonly used with micrometers, indicators, Holtest, micrometer head, borematics, and bench mikes. | ||
| 965013 | 2m version of 937387 cable. | |||
) |
936937 | 1m cable commonly used with indicators, MU-Checkers and gages, displays, linear height, Litematic, Heightmatic, Digi Derm and hardness testers. | ||
| 965014 | 2m version of 936937 cable. | |||
 |
05CZA624 | 1m coolant proof caliper cable. | ||
|
|
05CZA662 | 1m coolant proof micrometer cable. | ||
| -- | Standard Mitutoyo gage cables can be used without modification with all MicroRidge gage interface products. We show the most common cables above. Mitutoyo cables are available from your Mitutoyo dealer or can be purchased from MicroRidge. | |||
| Ono Sokki |
) |
G-ONOSOK-6 | 6' interface cable for Ono Sokki gages. The gage extension (P/N: G-EXT) should not be used with this cable. The gage end of the cable uses a custom connector with a ribbon cable manufactured by Ono Sokki. The gage output format is Ono Sokki. Only for use with the GageWay 3 and GageWay5 interfaces. | |
| Starrett |
) |
G-LP-MIT | 6' interface cable for use with Starrett 2700 series gages. The Starrett 2700 gages are a private labeled version of the CDI Logic Plus gage. The gage output format with this cable is Mitutoyo. | |
| -- |
) |
G-EXT | Gage extension cable (all pins connected). Standard length is 8'. Call for other lengths. | |
| -- |
){kind=small} |
MR-10P-CON | 10-pin connector for user-terminated gage cables. | |
RS-232 Connection
Options
Serial devices can be connected to the GageWay3, GageWay5, Mx4 and Mx8 interfaces
with the following devices.
For additional information refer to the
RS-232 Connection Options.
| Product | Photo | Part No. | Description | Price |
| LC Cable |
){kind=small} |
GW-LC | LC Cable. 24" level converter cable for connecting RS-232 devices to the GageWay3, GageWay5, and Mx8 interfaces. | |
| ProCable |
){kind=small} |
PROCABLE | 36" ProCable for converting RS-232 data to a Mitutoyo compatible format. This cable can be used with any Mitutoyo compatible interface only if the interface supplies 5 volt power on pin 9. MicroRidge supports this cable on the GageWay3, GageWay5, Mx4 and Mx8 interfaces. | |
| ProAdapter |
) |
PRO-A-DB9 | The ProAdapter allows you to customize the pinouts so that you can connect serial devices with non-standard DB9 pinouts to a standard PC serial port. |
All prices in US dollars and subject to change without notice.
Revised February 13, 2012.
Home |
MobileCollect
Wireless |
GageWay Interfaces
| WedgeLink Keyboard
Wedges
MobileCollect Store
| GageWay Store
| Gage
Cables Store |
WedgeLink Store
| USB &
RS-232 Cables
Store
Copyright © 2012 MicroRidge Systems, Inc.
All Rights Reserved.
Revised February 19, 2012
){kind=small}
)
){kind=small}
)
)
){kind=link}
){kind=link}