MicroRidge Store

Measurement Collection Technology
for Today & Tomorrow!

WedgeLink Keyboard Wedge Store

All WedgeLink hardware & software keyboard wedges can be purchased from this store. We typically ship within 24-hours (often the same day), offer free technical support, and a money-back guarantee. Product warranty information can be found on our Product Warranty page. Listed below are quick links to the categories in this WedgeLink Keyboard Wedge Store.

WedgeLink Keyboard Wedge Store Categories

Software Keyboard Wedges
Hardware Keyboard Wedges
Foot & Hand Switches

**WedgeLink Software Keyboard Wedges**
Product	Photo	P/N	Description	Electronic Delivery	Physical Delivery
WedgeLink Lite Version 2		WLNK-LE	Software keyboard wedge for users that do not need to perform any data parsing on the input packets.	89.00	99.00
WedgeLink Standard Version 2		WLNK-SE	Software keyboard wedge for users that need full data parsing capabilities.	195.00	205.00

**WedgeLink Hardware Keyboard Wedges**
Product	Photo	P/N	Description	Price
WedgeLink DG		WLNK-DG-NGC	Hardware keyboard wedge for digital gages. Gages supported include CDI, Federal Maxum, Federal uMaxum, Mitutoyo, Ono Sokki. Also supports non-Mitutoyo gages that have a Mitutoyo compatible output. You will also need to purchase the appropriate gage cable to connect WedgeLink DG to your gage. If your gage cable does not have a read button you must use an external foot switch or hand switch.	135.00
		WLNK-DG-905338	Hardware keyboard wedge and a Mitutoyo 905338 gage cable. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 905338 is a non-coolant proof cable without a read button.	179.00
		WLNK-DG-959149	Hardware keyboard wedge with Mitutoyo 959149 gage cable. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 959149 is a non-coolant proof cable with a read button.	179.00
		WLNK-DG-05CZA624	Hardware keyboard wedge with Mitutoyo 05CZA624 gage cable. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 05CZA624 is a coolant proof cable with a read button. This cable is used with coolant proof calipers.	199.00
		WLNK-DG-05CZA662	Hardware keyboard wedge with Mitutoyo 05CZA662 gage cable. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 05CZA662 is a coolant proof cable with a read button. This cable is used with coolant proof micrometers.	199.00
WedgeLink SP		WLNK-SP-19.2K-N-8-1	Hardware wedge for direct RS-232 input. The baud rate and communication parameters are permanently set to 19.2K-N-8-1.	149.00
		WLNK-SP-9600-N-8-1	Hardware wedge for direct RS-232 input. The baud rate and communication parameters are permanently set to 9600-N-8-1. This hardware wedge is available at a reduced price when purchased with selected gage interfaces or a MobileCollect RS-232 Base.	149.00
		WLNK-SP-4800-E-7-S	Hardware wedge for direct RS-232 input. The baud rate and communication parameters are permanently set to 4800-E-7-1 (also supports 4800-E-7-2). This hardware wedge also supports gages that contain the Simplex Opto or Simplex Proximity interface.	149.00
WedgeLink SM		WLNK-SM	Hardware keyboard wedge for Mitutoyo gage input. A serial port is required on your PC in order to use the hardware wedge setup program. If you do not have a serial port you should purchase a Serial to USB cable.	219.00
WedgeLink HW		WLNK-HW	Hardware keyboard wedge for direct RS-232 input. A serial port is required on your PC in order to use the hardware wedge setup program. If you do not have a serial port you should purchase a Serial to USB cable.	239.00

Foot & Hand Switches
Foot and hand switches are available for use with WedgeLink DG, WedgeLink SM and WedgeLink HW. Foot and hand switches are used to tell the wedge to get a measurement from the attached gage. For the WedgeLink SM and WedgeLink HW, you will need to configure the read switch operation with the included WedgeLink Setup program.

Photo	P/N	Description	Price
	FTSW-MPLG	Foot switch with 6' cable terminated with 2.5 mm subminiature phone plug.	69.00
	HNDSW-MPLG	Handheld remote read switch with 6' cable terminated with 2.5 mm subminiature phone plug.	69.00

All prices in US dollars and subject to change without notice.
Revised February 13, 2012.

Revised February 19, 2012