WedgeLink DG Hardware Keyboard Wedge for Digital Gages

WedgeLink DG Hardware Wedge

Input Data from Digital Gages into your PC Application

The WedgeLink DG is a hardware keyboard wedge that supports digital gages from CDI, Federal (Maxum and µMaxum), Mitutoyo and Ono Sokki. Other manufacturers also produce gages that have a Mitutoyo compatible output. These include Federal, LMI and others. These gages will also work with WedgeLink DG.

With the WedgeLink DG, you can transfer gage readings into any PC application that accepts keyboard input. Some of the more common applications that are used with the WedgeLink DG include Microsoft Excel, Microsoft Access, etc.

Unlike wedges from other manufacturers, if the cable you have connected to WedgeLink DG fails (not uncommon with many handheld gages), you only have to replace the gage cable and not the entire wedge assembly. Other manufacturers permanently attach the gage cable to the wedge which requires you to replace the entire wedge when the gage cable fails.

A table comparing the WedgeLink keyboard wedges available from MicroRidge can be found on the WedgeLink Overview page.

You can buy just the WedgeLink DG with or without a Mitutoyo gage cable. If you wish to purchase the WedgeLink DG with a Mitutoyo gage cable, see the table below. To purchase gage cables for other gages, please refer to the Cables Store.

Part Number	Description	Gages
WLNK-DG-NGC	WedgeLink DG without gage cable	For use with Digital Gages from CDI, Federal (Maxum and µMaxum. Mitutoyo and Ono Sokki. Also supports non-Mitutoyo gages that have a Mitutoyo compatible output. You will also need to purchase the appropriate gage cable to connect WedgeLink DG to your gage. If your gage cable does not have a read button you must use an external foot switch or hand switch.
WLNK-DG-905338	WedgeLink DG with Mitutoyo 905338 1m cable	For use with Mitutoyo Digimatic Indicators without Absolute Encoder including most Mitutoyo Height Gages, Depth Gages, Scale Units, and Thickness Gages. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 905338 is a non-coolant proof cable without a read button. You need to use an external external foot switch or hand switch in order to request a reading from your gage.
WLNK-DG-959149	WedgeLink DG with Mitutoyo 959149 1m cable	For use with Mitutoyo Digimatic Calipers, Depth Gages, and Scales without Absolute Encoder. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 959149 is a non-coolant proof cable with a read button.
WLNK-DG-05CZA624	WedgeLink DG with Mitutoyo 05CZA624 1m cable	For use with all Mitutoyo Coolant Proof Calipers and Coolant Proof Digimatic Scale Units. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 05CZA624 is a coolant proof cable with a read button.
WLNK-DG-05CZA662	WedgeLink DG with Mitutoyo 05CZA662 1m cable	For use with Mitutoyo Coolant Proof Digimatic Micrometer with IP65 rating. The gage cable plugs into the 10-pin connector on WedgeLink DG. The 05CZA662 is a coolant proof cable with a read button.