Designed & Made in the USA Since 1983
Wirelessly connect your Kroeplin gage to your SPC software or any data collection application — eliminating manual data entry errors at the point of measurement. This is the Mini Mobile Module EVO (M3E) connector and interface adapter kit for Kroeplin gages. This product includes both the gage cable and the interface adapter required for the connection. Pairs with the Mini Mobile Module EVO M3E transmitter to bring your gage online with MobileCollect.
Need a replacement adapter or cable only? Contact sales@microridge.com.
Transmitter Family – Mini Mobile Module EVO (M3E)
Connector Variant – M3 (2×3, 6-Pin) — TriggerSync Ready | Compatible with M3 and M3E Transmitters
Standard Cable Length – 6.5″
SKU – MC-M3-22806-MIT-6.5
Required Hardware – Mini Mobile Module EVO (M3E) and MobileCollect Base
Read Button – No
Connector IP Rating – N/A
Gage Brand – Kroeplin
$290.00
The M3 Wireless Connector for Kroeplin gages is the link between your Kroeplin instrument and the MobileCollect Wireless measurement collection system. Once connected, measurement data transmits wirelessly from the gage to your SPC software — no manual data entry, no transcription errors, no clipboard in between.
Unlike most M3 connectors which plug directly into a gage’s SPC output, the Kroeplin connection requires both a gage cable and an interface adapter. This product includes both components. The adapter converts the Kroeplin signal to a format compatible with the Mini Mobile Module EVO (M3E) transmitter, and each reading transmits wirelessly from the Mini Mobile Module EVO to a MobileCollect Base receiver connected to your PC or data collection workstation.
This product ships as a complete kit with both the gage cable and the interface adapter. If you need a replacement interface adapter or gage cable individually (not the full kit), contact sales@microridge.com.
Not sure if this is the right connector for your Kroeplin gage? Use the MobileCollect Selection Tool to verify, or contact sales@microridge.com for assistance.
MicroRidge also offers the Kroeplin 22806-MIT cable/connector for other systems in the MobileCollect and GageWay product families:
DC Connector — Kroeplin 22806-MIT — For the Command Mobile Module wireless transmitter. Use the Command Mobile Module when you need two-way wireless communication — for example, triggering gage readings across multiple transmitters simultaneously from the MobileCollect Base or your SPC software. This is common on large fixtures or multi-point measurement setups where operators can’t physically press each gage’s data send button.
OEM SPC Cable — Kroeplin 22806-MIT — For wired connections to the Digital Remote or GageWay interfaces. The Digital Remote provides two-way communication similar to the Command Mobile Module but over a wired connection — ideal for stationary measurement stations. Also compatible with all GageWay wired gage interfaces.
MobileCollect is a brand-agnostic measurement collection platform — it doesn’t lock you into a single gage manufacturer. Whether your shop floor runs Mitutoyo calipers alongside Mahr micrometers, Starrett indicators, or Fowler height gages, MobileCollect connects them all into a single wireless SPC data network. This connector is one component in that system. To complete the wireless link, pair it with a Mini Mobile Module EVO transmitter (MC-MM-M3-EVO) and a MobileCollect Base Receiver.
MC-M3-22806-MIT-6.5 | |
|---|---|
Transmitter Family | Mini Mobile Module EVO (M3E) |
M3 Cable/Connector Variant | M3 (2×3, 6-Pin) — TriggerSync Ready | Compatible with M3 and M3E Transmitters |
Standard Cable Length | 6.5 inches |
SKU | MC-M3-22806-MIT-6.5 |
Required Hardware | Mini Mobile Module EVO (M3E) & MobileCollect Base |
Read Button | No |
IP Rating | N/A |
Gage Brand | Kroeplin |