Designed & Made in the USA Since 1983
Wirelessly connect your Ono Sokki digital indicator to your SPC software or any data collection application — eliminating manual data entry errors at the point of measurement. This is the Mini Mobile Module (M3) connector for Ono Sokki digital indicators. Pairs with the Mini Mobile Module M3 transmitter to bring your indicator online with MobileCollect.
Important: The Ono Sokki connector requires a legacy Mini Mobile Module M3 transmitter and is not compatible with the Mini Mobile Module M3E. Contact sales@microridge.com before ordering.
Transmitter Family – Legacy – Mini Mobile Module (M3)
Connector Variant – M3 (2×3, 6-Pin) — TriggerSync Ready | Only Compatible with Legacy M3 Transmitters
Standard Cable Length – 6.5″
SKU – MC-M3-AA-963B-6.5
Required Hardware – Mini Mobile Module (M3) and MobileCollect Base
Read Button – No
Connector IP Rating – N/A
Gage Brand – Ono Sokki
$125.00
The M3 Wireless Connector for Ono Sokki digital indicators is the link between your Ono Sokki instrument and the MobileCollect Wireless measurement collection system. Once connected, measurement data transmits wirelessly from the indicator to your SPC software — no manual data entry, no transcription errors, no clipboard in between.
This connector attaches directly to your Ono Sokki indicator’s data output port and plugs into a Mini Mobile Module (M3) transmitter — together, they replace a standard wired SPC cable with a compact wireless setup. Each reading transmits wirelessly from the Mini Mobile Module to a MobileCollect Base receiver connected to your PC or data collection workstation.
Not sure if this is the right connector for your Ono Sokki indicator? Use the MobileCollect Selection Tool to look up your specific model from a database of over 3,500 gages, or contact sales@microridge.com.
MicroRidge also offers the 963B cable/connector for the GageWay product family:
OEM SPC Cable — Ono Sokki 963B  — For wired connections to the Digital Remote or GageWay interfaces. The Digital Remote provides two-way communication similar to the Command Mobile Module but over a wired connection — ideal for stationary measurement stations. Also compatible with all GageWay wired gage interfaces.
MobileCollect is a brand-agnostic measurement collection platform — it doesn’t lock you into a single gage manufacturer. Whether your shop floor runs Mitutoyo calipers alongside Mahr micrometers, Starrett indicators, or Fowler height gages, MobileCollect connects them all into a single wireless SPC data network. This connector is one component in that system. To complete the wireless link, pair it with a Mini Mobile Module transmitter (MC-MM-M3) and a MobileCollect Base Receiver.
MC-M3-AA-963B-6.5 Specs | |
|---|---|
Transmitter Family | Mini Mobile Module (M3) |
Standard Cable Length | 6.5 inches |
SKU | MC-M3-AA-963B-6.5 |
Required Hardware | Mini Mobile Module (M3) & MobileCollect Base |
Read Button | No |
IP Rating | N/A |
Gage Brand | Ono Sokki |