Measurement Collection Technology
for Today & Tomorrow!
|
|
Measurement Collection Technology |
Software & Firmware
Updates
The software and firmware updates for MobileCollect and GageWay Wireless are available on this page. MobileCollect replaced GageWay Wireless in May 2010. MobileCollect supports GageWay Wireless and allows you to mix MobileCollect and GageWay Wireless in a wireless configuration.
Updates for Other Products
The updates for GageWay, WedgeLink, etc. are available on the
Software & Firmware Updates page.
MobileCollect Wireless Firmware & Software Updates
The updates available for MobileCollect are shown in the table below.
| Product |
Software Version |
Firmware Version |
Release Date |
Comments |
|---|---|---|---|---|
| USB & RS-232 Base | -- | 3.30 | 3-30-12 | Not for use with the RS-232 Base 300 or GageWay Wireless bases. |
| Digital Mobile Module | -- | 2.34 | 3-30-12 | |
| Command Mobile Module | -- | 2.34 | 3-30-12 | |
| RS-232 Mobile Module V2 | -- | 2.34 | 3-30-12 |
Use for RS-232 Mobile Modules shipped on or after September 1, 2011. This version requires MobileCollect Setup Program version 3.4.0.55 (released 2-19-12) or later. |
| RS-232
Mobile Module (Discontinued 8-31-2011) |
-- | 2.02 | 2-1-11 | Use for RS-232 Mobile Modules shipped on or before August 31, 2011 |
| RS-232 Remote | -- | 4.04a | 3-20-12 | Not for use with the RS-232 Remote 300 or GageWay Wireless Remote |
|
MobileCollect Setup Program (for Microsoft Windows) |
3.4.0.56 | -- | 3-30-12 |
This download contains the Setup Program, Sniffer Program, ComTestSerial and Users Guide. A password is required to install this setup program. The password can be provided to current wireless system users. For the current password and additional information, please contact us. |
| WedgeLink Xpress | 3.0.1.203 | -- | 11-2-11 | Keyboard Wedge software for use with MobileCollect & GageWay Wireless bases. |
GageWay Wireless Firmware & Software Updates
The final updates for GageWay Wireless are shown in the following table. The MobileCollect Setup Program can be used to set up and configure a GageWay wireless system.
| Product |
Operational Mode |
Software Version |
Firmware Version |
Release Date |
ReadMe | Comments |
|---|---|---|---|---|---|---|
| MiniStation | Base | -- | 3.02 | 5-21-08 | ReadMe | Requires Wireless Setup Program Version 3.2.0.26 or later. |
| MiniStation | Remote | -- | 3.01 | 4-8-08 | Requires Wireless Setup Program Version 3.2.0.26 or later. | |
| Universal Mobile Module | -- | -- | 1.22 | 8-24-10 | ReadMe | Requires Wireless Setup Program Version 3.2.0.26 or later. |
| Mitutoyo Mobile Module (discontinued) |
-- | -- | 2.21 | 1-20-08 | ReadMe | |
|
Wireless Setup Program (for Microsoft Windows) |
-- | 3.2.0.29 | -- | 8-3-09 | ReadMe | A password is required to install this setup program. The password can be provided to current wireless system users. For the current password and additional information, please contact us. |
USB Driver
MicroRidge products that require a USB to Serial driver are all based on the USB to Serial IC manufactured by FTDI Chip (www.ftdichip.com). These products include:
GageWay SM with USB output
MobileCollect USB Base
Serial to USB interface cable
The latest USB driver for these devices can be downloaded below.
|
Product |
USB Driver |
|---|---|
| Virtual serial port USB Driver for Windows XP, Vista & Windows 7.
This driver is a WHQL (Windows Hardware Quality Labs) certified release. This driver is only for use with products containing the USB to Serial IC manufactured by FTDI Chip. |
Version 2.08.14 3-16-11 |
Home |
MobileCollect
Wireless |
GageWay Interfaces
| WedgeLink Keyboard
Wedges
MobileCollect Store
| GageWay Store
| Gage
Cables Store |
WedgeLink Store
| USB &
RS-232 Cables
Store
Copyright © 2012 MicroRidge Systems, Inc.
All Rights Reserved.
Revised May 15, 2012