Skip to main content

GageWay Pro User Guide
The GageWay Pro interfaces are the most advanced and feature rich gage interfaces available today.

Front Panel Ports
4
Back Panel Multifunction Serial Ports
1
USB Serial Output
Yes
Keyboard Wedge
Yes
DB9 Output
Yes
Chaining
Up to 9 interfaces (can be the same model or mixture of Pro4 and Pro8)
Width
7.38"
Height
1.58"
Depth
3.90"

GageWay Pro4

Part Number: GW-PRO4

The GageWay Pro interfaces are the fastest, most advanced and configurable interfaces available today.  These interfaces support a wide range of digital gages and serial devices from manufacturers including Mitutoyo, Mahr Federal, Ono Sokki, Fowler, INSIZE, Starrett, Sylvac, Ohaus, Mettler Toledo, etc.

Some manufacturers have cables that can be purchased with an RS-232 or Mitutoyo compatible output.  When using these gages with the GageWay Pro interfaces, you should get the cable that has the Mitutoyo compatible output.

  • All front panel input ports support Mitutoyo (also gages with Mitutoyo compatible output), Mahr Federal, Ono Sokki, Fowler, INSIZE digital indicators, RS-232, etc.
  • RS-232 devices are connected via a low cost Level Converter cable (P/N: GW-LC) and your gage cable.
  • The AutoBaud feature can automatically determine the RS-232 baud rate and communication parameters for any of the front panel input ports.
  • USB Keyboard Wedge and USB serial ports are built into the GageWay Pro interfaces.
  • No driver installation required for the keyboard wedge function (driver installation required for the USB serial port).
  • Powered by the USB connection to your PC.
  • Supports baud rates from 1200 to 57.6K.
  • Includes a 6′ USB cable.
  • Get a gage reading by pressing a foot switch (or hand switch), a computer command or the read button on your gage cable.
  • Configure via an easy-to-use Windows-based Setup Program.  You do not have to open the interface to configure it.
  • To maximize the measurement collection speed, each gage channel has a dedicated processor and there is a communications processor to manage the communications with the gage channel and the host computer.  For example, the Pro8 interface contains 8 gage processors and 1 communications processor for a total of 9 processors.
  • High speed continuous read operation.  Test run with 8 Mitutoyo gages in a continuous read mode for 60 seconds gave the following results:
    • Previous Mx8 interface captured 984 measurements in 60 seconds.
    • Current Pro8 interfaces captured 5,230 measurements in 60 seconds.

Compatible Cables: Interface Cables

$715.00

Add to Wishlist Browse Wishlist

Interface Cables

-MicroRidge Interface Cables

--Mahr Federal

Federal µMaxum Gage Cable

Federal µMaxum Gage Cable

Digital Interface Cable for Federal µMaxum gage. The number of pins on the gage connector is 7. The gage output is Mitutoyo compatible.
$166.00
Federal Maxum Gage Cable

Federal Maxum Gage Cable

Digital Interface Cable for Federal Maxum gage. The number of pins on the gage connector is 6.
$153.00
Federal Maxum E-2 Gage Cable

Federal Maxum E-2 Gage Cable

Digital Interface Cable for Federal Maxum E-2 gage. The number of pins on the gage connector is 10.
$170.00

--Chicago Dial Indicator (CDI)

CDI Logic Plus, Basic Cable, Starrett 2700 Series Gage Cable

CDI Logic Plus, Basic Cable, Starrett 2700 Series Gage Cable

Digital Interface Cable commonly used with CDI Logic Plus or Logic Basic. The gage output format with this cable is Mitutoyo compatible.
$112.00
CDI Logic Plus Cable

CDI Logic Plus Cable

Digital Interface Cable commonly used when you want to power the gage from the interface. The gage output format with this cable is Mitutoyo compatible.
$112.00

--Other

Ono Sokki Interface Gage Cable

Ono Sokki Interface Gage Cable

Digital Interface Cable for Ono Sokki gages.
$95.00
Gage Extension Cable

Gage Extension Cable

Digital Interface extension cable with all pins connected.
$77.00

-Digital Interface Cables

--Mitutoyo

SPC Cable, Mitutoyo Digimatic, Straight Water-Proof Connector w/ Button, Type A | 05CZA624

SPC Cable, Mitutoyo Digimatic, Straight Water-Proof Connector w/ Button, Type A | 05CZA624

Digital Interface Cable commonly used with Mitutoyo coolant proof calipers.
$110.75
SPC Cable, Mitutoyo Digimatic, Straight Standard Connector, S1/D2, Type SF | 06AGL011SPC Cable, Mitutoyo Digimatic, Straight Standard Connector, S1/D2, Type SF | 06AGL011

SPC Cable, Mitutoyo Digimatic, Straight Standard Connector, S1/D2, Type SF | 06AGL011

Digital Interface Cable for Mitutoyo High-Accuracy Gages that Use 06AGL011 Cable.
$90.00
SPC Cable, Mitutoyo Digimatic, Round 6-Pin Connector, Type E | 937387
1 meter (937387)1 meter (937387)2 meter (965013)2 meter (965013)
1 meter (937387)1 meter (937387)2 meter (965013)2 meter (965013)
1 meter (937387)1 meter (937387)2 meter (965013)2 meter (965013)
1 meter (937387)1 meter (937387)2 meter (965013)2 meter (965013)
1 meter (937387)1 meter (937387)2 meter (965013)2 meter (965013)
Clear

SPC Cable, Mitutoyo Digimatic, Round 6-Pin Connector, Type E | 937387

Digital Interface Cable commonly used with indicators, MU-Checkers and gages, displays, linear height, Litematic, Heightmatic, Digi Derm and hardness testers.
$67.00$76.00
SPC Cable, Mitutoyo Digimatic, Flat Straight Water-Proof Connector, Type G | 21EAA194

SPC Cable, Mitutoyo Digimatic, Flat Straight Water-Proof Connector, Type G | 21EAA194

Digital Interface Cable commonly used with dust and waterproof Mitutoyo indicators.
$148.00
SPC Cable, Mitutoyo Digimatic, Flat Straight 5-pin Connector, Type F | 905338
1 meter (905338)1 meter (905338)2 meter (905409)2 meter (905409)
1 meter (905338)1 meter (905338)2 meter (905409)2 meter (905409)
1 meter (905338)1 meter (905338)2 meter (905409)2 meter (905409)
1 meter (905338)1 meter (905338)2 meter (905409)2 meter (905409)
1 meter (905338)1 meter (905338)2 meter (905409)2 meter (905409)
Clear

SPC Cable, Mitutoyo Digimatic, Flat Straight 5-pin Connector, Type F | 905338

Digital Interface Cable commonly used with height gages, indicators, depth gages, scale unit and thickness gages.
$50.25$57.50
SPC Cable, Mitutoyo Digimatic, Flat Straight 5-Pin Connector w/ Button, Type C | 959149
1 meter (959149)1 meter (959149)2 meter (959150)2 meter (959150)
1 meter (959149)1 meter (959149)2 meter (959150)2 meter (959150)
1 meter (959149)1 meter (959149)2 meter (959150)2 meter (959150)
1 meter (959149)1 meter (959149)2 meter (959150)2 meter (959150)
1 meter (959149)1 meter (959149)2 meter (959150)2 meter (959150)
Clear

SPC Cable, Mitutoyo Digimatic, Flat Straight 5-Pin Connector w/ Button, Type C | 959149

Digital Interface Cable with data send button commonly used with digimatic calipers, height gages, depth gages and scale units.
$58.75$69.25
SPC Cable, Mitutoyo Digimatic, Flat 10-Pin Connector, Type D | 936937
1 meter (936937)1 meter (936937)2 meter (965014)2 meter (965014)
1 meter (936937)1 meter (936937)2 meter (965014)2 meter (965014)
1 meter (936937)1 meter (936937)2 meter (965014)2 meter (965014)
1 meter (936937)1 meter (936937)2 meter (965014)2 meter (965014)
1 meter (936937)1 meter (936937)2 meter (965014)2 meter (965014)
Clear

SPC Cable, Mitutoyo Digimatic, Flat 10-Pin Connector, Type D | 936937

Digital Interface Cable commonly used with micrometers, indicators, Holtest, micrometer head, borematics, and bench micrometers.
$63.00$82.00

--Mahr Federal

Mahr Federal Caliper Cable with Data Send | 4102915

Mahr Federal Caliper Cable with Data Send | 4102915

Digital Interface Cable commonly used for the Mahr Federal caliper and features a data send button.
$162.75

-RS-232 Level Converter

Level Converter Cable

Level Converter Cable

The LC Cable allows you to connect RS-232 serial devices to the MicroRidge GageWay Pro interfaces.
$64.00

-DB9 Cables

ProAdapterProAdapter

ProAdapter

Create Custom Pinouts for a DB9 Cable!
$59.00
DB9 Null Modem Cable

DB9 Null Modem Cable

This is a 9-pin serial null modem cable, DB9F to DB9F.
$12.00
DB9 Adapter Kit

DB9 Adapter Kit

The DB9 Adapter Kit includes the most common DB9 adapters.
$20.00
6′ DB9 Serial Extension Cable

6′ DB9 Serial Extension Cable

This is a 9-pin serial extension cable. DB9F to DB9M
$12.00

-RS-232 Gage Cables

Simplex Opto Gage Interface Cable (Fowler & Starrett) | 54-115-333

Simplex Opto Gage Interface Cable (Fowler & Starrett) | 54-115-333

RS-232 Interface Cable commonly used with use with Fowler/Sylvac & Starrett 781 and 782 series gages.
$177.50
Mahr Federal Caliper Cable with Data Send RS-232 | 4102410

Mahr Federal Caliper Cable with Data Send RS-232 | 4102410

RS-232 Interface Otpo Cable commonly used for Mahr Federal caliper.
$156.00

-USB Cables

USB Type A Cable
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
3 feet3 feet6 feet6 feet
Clear

USB Type A Cable

USB extension cable with Type A male/male USB connectors. This cable can be used to connect the USB Base to a USB port on a PC or laptop.
$6.00
USB Extension Cable

USB Extension Cable

USB extension cable with Type A USB male/female connectors.
$6.00