Online Store
MobileCollect Wireless
MobileCollect makes it easier to bring your gage to what is being measured, rather than bringing what is being measured to your gage. Collect measurements with handheld gages (calipers, digital indicators, micrometers, etc.) and other instruments, and send wirelessly to your PC.
MobileCollect gives you the greatest range of options and flexibility for configuring your wireless measurement collection. MobileCollect supports a wide range of digital gages and RS-232 devices from manufacturers including Mitutoyo, Mahr Federal, Ono Sokki, Fowler, INSIZE, Starrett, Sylvac, Ohaus, Mettler Toledo, etc. and our own GageWay line of interfaces.
Jump To Section
- Mobile Module Transmitters
- Remote Transmitters
- Base Receivers
- Accessories
- Mini Mobile Module Gage Cables
- Command Mobile Module Gage Cables
- RS-232 Mobile Module Gage Cables
- DB9 Cables
- USB Cables
Mobile Module Transmitters
RS-232 V2 Mobile Module (V2)
The Mini Mobile Module is the go-to transmitter for RS-232 gages. If your gage has an RS-232 data output port the RS-232 V2 Mobile Module can get that data into your computer.
$390.00
Mini Mobile Module (M3)
The Mini Mobile Module is the go-to transmitter for digital gages. All your gage needs is a digital SPC output and you can use this smaller form factor transmitter to get data from your device into your computer with a…
$280.00
Command Mobile Module (DC)
The Command Mobile Module is used to initiate gage readings remotely via commands sent from a MobileCollect Base.
$375.00
Remote Transmitters
RS-232 Remote
The RS-232 Remote is used to connect an RS-232 device to a MobileCollect System in a non-mobile setup. You can also initiate gage readings remotely via commands sent from a MobileCollect Base.
$435.00 – $440.00
AC Adapter IncludedAC Adapter IncludedAC Adapter Not IncludedAC Adapter Not Included Clear |
Digital Remote
The Digital Remote is used to connect a digital gage to a MobileCollect System in a non-mobile setup. You can also initiate gage readings remotely via commands sent from a MobileCollect Base.
$435.00 – $440.00
AC Adapter IncludedAC Adapter IncludedAC Adapter Not IncludedAC Adapter Not Included Clear |
Base Receivers
Wedge/USB Base
The Wedge/USB Base receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the most flexible MobileCollect Base offering both Serial Communication and KeyBoard Wedge functionality.
$495.00
USB MicroBase
The USB MicroBase receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the base you need for mobile devices such as laptops or tablets.
$430.00
USB Base
The USB Base receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the base you need for connecting to your computer via a USB Serial connection.
$430.00
RS-232/USB Base
The RS-232/USB Base receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the base you need for connecting to your computer via a RS-232 DB9 connection.
$445.00 – $450.00
AC Adapter IncludedAC Adapter IncludedAC Adapter Not IncludedAC Adapter Not Included Clear |
Accessories
Hand Switch
Handheld remote read switch with 6′ cable terminated with 2.5 mm subminiature phone plug.
$79.00
Mini Mobile Module (M3) Connectors
Mitutoyo
M3 Connector – Mitutoyo 959149
Mini Mobile Module Connector (M3) for Mitutoyo gages that use the Mitutoyo 959149 cable. There is a read button on this cable. This cable is used for several gages, including the non-coolant proof calipers.
$110.00
M3 Connector – Mitutoyo 905338
Mini Mobile Module Connector (M3) for Mitutoyo gages that use the Mitutoyo 905338 cable. This cable is typically used with indicators. There is no read button on this cable.
$110.00
M3 Connector – Mitutoyo 2×5 Connector Cable
Mini Mobile Module Connector (M3) for Mitutoyo gages that have a 2×5 connector on the gage.
$110.00
M3 Connector – Mitutoyo 2×3 Connector
Mini Mobile Module Connector (M3) for Mitutoyo gages that use a round 2×3 gage cable.
$110.00
M3 Connector – Mitutoyo 21EAA194
Mini Mobile Module Connector (M3) for specific Mitutoyo indicators that use the Mitutoyo 21EAA194 dust and waterproof cable.
$148.00
M3 Connector – Mitutoyo 06AGL011
Mini Mobile Module Connector (M3) for Mitutoyo High-Accuracy Gages that Use 06AGL011 Cable. Use when connecting to Mitutoyo Gage that communicates via Digimatic D2 to a Mini Mobile Module.
$128.00
M3 Connector – Mitutoyo 05CZA662
Mini Mobile Module Connector (M3) for Mitutoyo gages that use the Mitutoyo 05CZA662 coolant proof micrometer cable. There is a read button on this cable.
$149.00
M3 Connector – Mitutoyo 05CZA624
Mini Mobile Module Connector (M3) for Mitutoyo gages that use the Mitutoyo 05CZA624 coolant proof caliper cable. There is a read button on this cable.
$174.00
Mahr Federal
M3 Connector – Mahr Federal µMaxum Gage
Mini Mobile Module Connector (M3) for the Mahr Federal µMaxum gages. This connector is a 7-pin male and does not work with the Mahr Federal µMaxum II gages.
$149.50
M3 Connector – Mahr Federal Gage Cable
Mini Mobile Module Connector (M3) for various Mahr Federal gages. This connector is a 4-pin female. Supported gage families include (but not limited to) Digimar, MarCator, Millimess and µMaxum II.
$210.00
M3 Connector – Mahr Federal Caliper & Depth Gage
Mini Mobile Module Connector (M3) for Mahr Federal Caliper and Depth Gage Cable. There is a read button on this cable.
$210.00
3.5 inch3.5 inch6.5 inch6.5 inch Clear |
Starrett
M3 Connector – Starrett Digital Caliper and Micrometer Cable
Mini Mobile Module Connector (M3) for Starrett Digital Caliper (721 & 723) and Starrett Micrometer (731 & 733).
$161.00
3.5 inch3.5 inch6.5 inch6.5 inch Clear |
M3 Connector – Starrett 2900 Series Indicator Cable
Mini Mobile Module Connector (M3) for Starrett 2900 Series Indicator.
$423.50
Insize
M3 Connector – INSIZE Micro USB
Mini Mobile Module Connector (M3) for calipers that utilize a Micro USB connector.
$99.00
M3 Connector – INSIZE 2-Button Micrometer
Mini Mobile Module Connector (M3) for INSIZE 2-Button micrometer.
$99.00
Other
M3 Connector – TruPosition Gage Cable
Mini Mobile Module Connector (M3) for the TruPosition gage that contains 2 Mitutoyo caliper read units. The output format from this cable is Mitutoyo compatible.
$170.00
M3 Connector – Ono Sokki Digital Indicator Connector
Mini Mobile Module Connector (M3) for Ono Sokki Digital Indicators.
$125.00
M3 Connector – Kroeplin Gage & Interface Adapter
Mini Mobile Module Connector (M3) gage connector and interface adapter for Kroeplin gages. Contact MicroRidge if you just need a replacement interface adapter or gage connector.
$266.00
M3 Connector – Fowler/Sylvac Simplex Opto
Mini Mobile Module Connector (M3) for gages that utilize the Simplex Opto cable. Several different companies utilize the Simplex Opto cable.
$199.00
3.5 inch3.5 inch6.5 inch6.5 inch Clear |
M3 Connector – CDI Logic IQ & Logic ALG
Mini Mobile Module Connector (M3) for the CDI Logic IQ or Logic ALG gage. The output format from this cable is Mitutoyo compatible.
$140.00
Command Mobile Modules (DC) Connectors
Mitutoyo
DC Connector – Mitutoyo 905338
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 905338 cable. This cable is typically used with indicators. There is no read button on this cable.
$110.00
DC Connector – Mitutoyo 05CZA662
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA662 coolant proof micrometer cable. There is a read button on this cable.
$149.00
DC Connector – Mitutoyo 959149
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 959149 cable. There is a read button on this cable. This cable is used for several gages, including the non-coolant proof calipers.
$110.00
DC Connector – Mitutoyo 2×3 Connector
Command Mobile Module Connector (M3) for Mitutoyo gages that use a round 2×3 gage cable.
$110.00
DC Connector – Mitutoyo 21EAA194
Command Mobile Module Connector (M3) for specific Mitutoyo indicators that use the Mitutoyo 21EAA194 dust and waterproof cable.
$148.00
DC Connector – Mitutoyo 2×5
Command Mobile Module Connector (DC) for Mitutoyo gages that have a 2×5 connector on the gage.
$110.00
DC Connector – Mitutoyo 06AGL011
Command Mobile Module Connector (DC) for Mitutoyo High-Accuracy Gages that use 06AGL011 Cable. Used when connecting to Mitutoyo Gage that communicates via Digimatic D2 to a Command Mobile Module.
$128.00
DC Connector – Mitutoyo 05CZA624
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA624 coolant proof caliper cable. There is a read button on this cable.
$174.00
Other
DC Connector – TruPosition Gage Cable
Command Mobile Module Connector (DC) for the TruPosition gage that contains 2 Mitutoyo caliper read units. The output format from this cable is Mitutoyo compatible.
$170.00
DC Connector – Kroeplin Gage & Interface Adapter
Command Mobile Module Connector (DC) gage connector and interface adapter for Kroeplin gages. Contact MicroRidge if you just need a replacement interface adapter or gage connector.
$266.00
DC Connector – CDI Logic IQ & Logic ALG
Command Mobile Module Connector (DC) for the CDI Logic IQ or Logic ALG gage. The output format from this cable is Mitutoyo compatible.
$140.00
RS-232 Mobile module Gage Cables
RS-232 V2 Connector – Proximity Connector
RS-232 V2 Mobile Module Connector (V2) for gages (calipers, micrometers, etc) that utilize the Proximity connector. Several brands utilize this connector.
$259.00
RS-232 V2 Connector – DB9
RS-232 V2 Mobile Module Connector (V2) for devices that utilize a DB9 connection.
$99.00
MaleMaleFemaleFemale |
StandardStandardNull ModemNull Modem Clear |
RS-232 V2 Connector – Power & Data Gage Cable
RS-232 V2 Mobile Module Connector (V2) for the following gages. Fowler/Bowers Pistol Grips | Fowler/Bowers Electronic Holemikes | Sylvac Quadra Test Electronic Indicators | Sylvac Mini Resistant Electronic Indicator
$293.00
DB9 Cables
USB Cables
USB Type A Cable
USB extension cable with Type A male/male USB connectors. This cable can be used to connect the USB Base to a USB port on a PC or laptop.
$6.00
3 feet3 feet6 feet6 feet Clear |
