Skip to main content

Wedge/USB Base

MobileCollect Hardware Components Users Guide
MobileCollect is a wireless data collection system designed for use on the factory floor, in …
MobileCollect Quick Start Users Guide
Want to quickly get started using MobileCollect? The steps shown in this document should get …

Wedge/USB Base

Part Number: MC-BASE-KW

The Wedge/USB Base receives measurements from Mobile Modules and Remotes. This base output options include USB serial and USB keyboard wedge. The keyboard wedge option allows direct data transfer to applications such as Microsoft Excel, Access, Minitab, etc.

Key Features:

  • Supports an unlimited number of Mobile Modules (transmitters) and Remotes (transmitters).
  • Configured by the MobileCollect Xpress or Extended Setup programs.
  • Field upgradeable firmware.
  • Range is up to 133 feet.
  • You can have several Bases adjacent to each other.  Each Base will only receive data from the Mobile Modules or Remotes that have been associated with the Base.
  • Data sent to the PC consists of standard RS-232 data that is accepted by virtually all SPC-DAQ software.
  • WedgeLink Xpress keyboard wedge and RF Sniffer included at no additional charge.

Keyboard Setup for Wedge/USB Base

Wedge/USB Base emulates the following keyboards
  • English (United States, QWERTY)
  • English (United Kingdom, QWERTY)
  • French (Belgium, AZERTY)
  • French (France, AZERTY)
  • German (Germany, QWERTZ)
  • Spanish (Mexico, QWERTY)

The default keyboard setting when Wedge/USB Base is shipped from the factory is English (United States, QWERTY).  The keyboard descriptions listed above match the keyboard selection in the Windows Region and Language dialog accessible from the Control Panel.

Keyboard Transfer Rate

The default setting for the keyboard transfer rate is approximately 72 characters per second.  In some instances, this rate is too fast for the computer that the Wedge/USB Base is connected to.  You have the ability to reduce this rate to approximately 30 or 8 characters per second.

Includes: DVD with Utilities and Driver | 6′ USB cable

$495.00

Add to Wishlist Browse Wishlist

MobileCollect Components

Command Mobile Module (DC)

Command Mobile Module (DC)

The Command Mobile Module is used to initiate gage readings remotely via commands sent from a MobileCollect Base.
$375.00
RS-232 V2 Mobile Module (V2)RS-232 V2 Mobile Module (V2)

RS-232 V2 Mobile Module (V2)

The Mini Mobile Module is the go-to transmitter for RS-232 gages. If your gage has an RS-232 data output port the RS-232 V2 Mobile Module can get that data into your computer.
$390.00
Mini Mobile Module (M3)

Mini Mobile Module (M3)

The Mini Mobile Module is the go-to transmitter for digital gages. All your gage needs is a digital SPC output and you can use this smaller form factor transmitter to get data from your device into your computer with a push of a button.
$280.00
USB MicroBase

USB MicroBase

The USB MicroBase receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the base you need for mobile devices such as laptops or tablets.
$430.00
Wedge/USB BaseWedge/USB Base

Wedge/USB Base

The Wedge/USB Base receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the most flexible MobileCollect Base offering both Serial Communication and KeyBoard Wedge functionality.
$495.00
RS-232/USB BaseRS-232/USB Base
AC Adapter IncludedAC Adapter IncludedAC Adapter Not IncludedAC Adapter Not Included
AC Adapter IncludedAC Adapter IncludedAC Adapter Not IncludedAC Adapter Not Included
Clear

RS-232/USB Base

The RS-232/USB Base receives measurement data sent from MobileCollect Transmitters and MobileCollect Remotes. This is the base you need for connecting to your computer via a RS-232 DB9 connection.
$445.00$450.00