Skip to main content

Command Mobile Module (DC)

MobileCollect Hardware Components Users Guide
MobileCollect is a wireless data collection system designed for use on the factory floor, in …
MobileCollect Quick Start Users Guide
Want to quickly get started using MobileCollect? The steps shown in this document should get …

Command Mobile Module (DC)

Part Number: MC-MM-DC

The Command Mobile Module is used to initiate gage readings remotely via commands sent from a MobileCollect Base.

Basic Features

  • Securely attaches to all handheld gages.
  • LEDs positioned to provide highly visible user feedback.
  • User replaceable gage cable.
  • Range up to 133 feet.
  • Battery life in excess of 500,000 readings.
  • Field upgradeable firmware.
  • Automatically turns itself off after each reading. No power switch required.
  • Read button is rated for 1 million cycles.

Advanced Features

  • Use the Command Mobile Module when it is not convenient to press the read button on the Mobile Module or on the gage.
  • Responds to read requests and sleep cycle commands from a Base.
  • Allows you to provide remote control of the Command Mobile Module.
  • Base can request single or multiple readings.
  • Set sleep cycles to increase battery life.
  • Control with send commands from your application on the host computer or by read switches connected to the Base.

Note:  A gage cable is not included with this Mobile Module.  You must order the appropriate gage cable separately. Refer to the MobileCollect Selection Tool page for additional information.

Compatible Connectors: DC Connectors

$375.00

Add to Wishlist Browse Wishlist

Command Mobile Module (DC) Connectors

This is what you need to connect your gage to the Command Mobile Module. Don't know what connector you need? Head to the Transmitter Connector page to look your gage up!

Mitutoyo

DC Connector – Mitutoyo 905338

DC Connector – Mitutoyo 905338

Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 905338 cable. This cable is typically used with indicators. There is no read button on this cable.
$110.00
DC Connector – Mitutoyo 05CZA662

DC Connector – Mitutoyo 05CZA662

Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA662 coolant proof micrometer cable. There is a read button on this cable.
$149.00
DC Connector – Mitutoyo 959149

DC Connector – Mitutoyo 959149

Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 959149 cable. There is a read button on this cable. This cable is used for several gages, including the non-coolant proof calipers.
$110.00
DC Connector – Mitutoyo 2×3 Connector

DC Connector – Mitutoyo 2×3 Connector

Command Mobile Module Connector (M3) for Mitutoyo gages that use a round 2×3 gage cable.
$110.00
DC Connector – Mitutoyo 21EAA194

DC Connector – Mitutoyo 21EAA194

Command Mobile Module Connector (M3) for specific Mitutoyo indicators that use the Mitutoyo 21EAA194 dust and waterproof cable.
$148.00
DC Connector – Mitutoyo 2×5

DC Connector – Mitutoyo 2×5

Command Mobile Module Connector (DC) for Mitutoyo gages that have a 2×5 connector on the gage.
$110.00
DC Connector – Mitutoyo 06AGL011

DC Connector – Mitutoyo 06AGL011

Command Mobile Module Connector (DC) for Mitutoyo High-Accuracy Gages that use 06AGL011 Cable. Used when connecting to Mitutoyo Gage that communicates via Digimatic D2 to a Command Mobile Module.
$128.00
DC Connector – Mitutoyo 05CZA624

DC Connector – Mitutoyo 05CZA624

Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA624 coolant proof caliper cable. There is a read button on this cable.
$174.00

Other

DC Connector – TruPosition Gage Cable

DC Connector – TruPosition Gage Cable

Command Mobile Module Connector (DC) for the TruPosition gage that contains 2 Mitutoyo caliper read units. The output format from this cable is Mitutoyo compatible.
$170.00
DC Connector – Kroeplin Gage & Interface Adapter

DC Connector – Kroeplin Gage & Interface Adapter

Command Mobile Module Connector (DC) gage connector and interface adapter for Kroeplin gages. Contact MicroRidge if you just need a replacement interface adapter or gage connector.
$266.00
DC Connector – CDI Logic IQ & Logic ALG

DC Connector – CDI Logic IQ & Logic ALG

Command Mobile Module Connector (DC) for the CDI Logic IQ or Logic ALG gage. The output format from this cable is Mitutoyo compatible.
$140.00