Online Store
Command Mobile Module (DC) Connectors
Below are the compatible connectors for the Command Mobile Module. These connectors can be replaced in the field.
Below is the 2×7 connector used by the Command and Digital Mobile Modules.
Command Mobile Modules (DC) Connectors
Mitutoyo
DC Connector – Mitutoyo 905338
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 905338 cable. This cable is typically used with indicators. There is no read button on this cable.
$110.00
DC Connector – Mitutoyo 05CZA662
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA662 coolant proof micrometer cable. There is a read button on this cable.
$149.00
DC Connector – Mitutoyo 959149
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 959149 cable. There is a read button on this cable. This cable is used for several gages, including the non-coolant proof calipers.
$110.00
DC Connector – Mitutoyo 2×3 Connector
Command Mobile Module Connector (M3) for Mitutoyo gages that use a round 2×3 gage cable.
$110.00
DC Connector – Mitutoyo 21EAA194
Command Mobile Module Connector (M3) for specific Mitutoyo indicators that use the Mitutoyo 21EAA194 dust and waterproof cable.
$148.00
DC Connector – Mitutoyo 2×5
Command Mobile Module Connector (DC) for Mitutoyo gages that have a 2×5 connector on the gage.
$110.00
DC Connector – Mitutoyo 06AGL011
Command Mobile Module Connector (DC) for Mitutoyo High-Accuracy Gages that use 06AGL011 Cable. Used when connecting to Mitutoyo Gage that communicates via Digimatic D2 to a Command Mobile Module.
$128.00
DC Connector – Mitutoyo 05CZA624
Command Mobile Module Connector (DC) for Mitutoyo gages that use the Mitutoyo 05CZA624 coolant proof caliper cable. There is a read button on this cable.
$174.00
Other
DC Connector – TruPosition Gage Cable
Command Mobile Module Connector (DC) for the TruPosition gage that contains 2 Mitutoyo caliper read units. The output format from this cable is Mitutoyo compatible.
$170.00
DC Connector – Kroeplin Gage & Interface Adapter
Command Mobile Module Connector (DC) gage connector and interface adapter for Kroeplin gages. Contact MicroRidge if you just need a replacement interface adapter or gage connector.
$266.00
DC Connector – CDI Logic IQ & Logic ALG
Command Mobile Module Connector (DC) for the CDI Logic IQ or Logic ALG gage. The output format from this cable is Mitutoyo compatible.
$140.00
Not sure which connector you need?
Check out our connector finder tool. Be sure to choose the Command Mobile Module connector in the tool.