This interface with USB output is powered by the USB port. To your PC application, this GageWay SM appears as a device connected to a serial port.

• Comes with a USB cable built in.
• No baud rate or communication parameters required.  The GageWay SM is pre-configured to operate at 9600-N-8-1.  (USB driver installation may be required for USB version.  Required Windows 2000 or later).
• Standard lengths are 18 and 72 inches.
• Supports Mitutoyo gages and any gage that provides a standard Mitutoyo output.
• Standard Mitutoyo cables can be used without modification.  These cables are available from any Mitutoyo dealer or can be purchased from MicroRidge.
• Plugs directly into a standard USB port.
• Powered by the USB port.  No external AC adapter is required.
• Data output format set to gage measurement followed by a carriage return.  No leading spaces are sent with the reading.
• Initiate single and continuous gage readings with the read button on the gage, an optional foot switch or hand switch, or a simple computer command.  The optional foot or hand switch plugs into a connector on the side of the GageWay SM.
• LED flashes when a gage reading has been obtained.
• Firmware (software in the GageWay SM) can be upgraded via the USB port.  Check our Products Downloads page for updates.
• Includes ComTestSerial communications test program.
• If you are using CDI or Federal gages with a Mitutoyo output, you may need to purchase the gage cables from MicroRidge.

Note: This interface is not designed to send data into Excel.  Purchase the GageWay KW for that feature.