Measurement Collection Specialists
Connect Any Gage into Any Software

 

MobileCollect Wireless
Remote Transmitters


Remotes are transmitters that send the measurement data to a Base.  Remotes are powered by an external power source (i.e., AC adapter) and are typically used to transfer measurement data from digital gages and RS-232 devices such as height gages, scales, etc.

MobileCollect supports a wide range of digital gages and RS-232 devices from manufacturers including Mitutoyo, Mahr Federal, Ono Sokki, Fowler, INSIZE, Starrett, Sylvac, Ohaus, Mettler Toledo, etc. and our own GageWay line of interfaces.

The cables needed for the Remote transmitters are the same cable used for our GageWay interfaces.  The more common cables can be found in the GageWay Gage Cables Store.  The cables required for the RS-232 Remote are the same cables you would plug into a DB9 on a PC.


The Digital Remote is used when you have a digital gage in a non-mobile setup that you want to connect to the wireless system. The RS-232 Remote is used when you have an RS-232 serial device, such as a gage interface or a scale, in a non-mobile setup that you want to connect to the wireless system.

Click Image for Front & Back Views

Click Image for Front & Back Views

Key Features:

  • The 10-pin input connector functions the same as the input connector on the GageWay interfaces.

  • Automatically detects the type of digital gage you have connected.

  • Connect external read switch (hand switch, foot switch, etc.) to the Digital Remote so that you can send a read request to the connected gage.

  • Field upgradeable firmware.

  • Range is 133 feet.

  • Powered by an external AC adapter.

Key Features:

  • The serial port looks like a serial port on a PC and can accept data from any RS-232 serial device.

  • Automatically detects baud rate and communication parameters for the connected RS-232 devices.

  • Connect external read switch (hand switch, foot switch, etc.) to the RS-232 Remote so that you can send a user-defined command to your RS-232 serial device.

  • Field upgradeable firmware.

  • Range is 133 feet.

  • Powered by an external AC adapter.


Review MobileCollect Overview

Compare MobileCollect Advantages

Review MobileCollect Specs

Download the MobileCollect User's Guides

Download the MobileCollect Selection Tool


 

Home  |  MobileCollect Wireless  |  GageWay Interfaces  |  WedgeLink Keyboard Wedges
MobileCollect Store  |  GageWay Store  |  Gage Cables Store  |  WedgeLink Store  |  USB & RS-232 Cables Store

 Copyright 2017 MicroRidge Systems, Inc.
All Rights Reserved.

Revised September 6, 2017